[TUTO] How to install HDD-SSD drive on your Vu + ZERO 4K

How to install SSD drive on your Vu+ ZERO 4k

Goals :

Connect and install an internal HDD drive on your Vu+ZERO 4K.

1 Requirements:

A certain number of prerequisites are necessary before starting:

– Vu+ ZERO 4K

– PVR KIT for VU+ ZERO 4K

– Internal SSD or HDD drive (2.5)  120 GB or any other seize 1 TB or 2 TB

IMPORTANT: for better performance we recommend to use SSD drive.

– Philips screwdriver

– 4X Screw 3.5

2. Connecting the HDD to its Vu +:

Connect your SSD drive to your VU + using the SATA port .

Open the PVT KIT

 

Insert 2.5 HDD or SSD

place the docking station up. tighten the screw

combine the connector into the D point located on the botton of the VU+ ZERO 4K

3. Initialization of the SSD-HDD Drive (VTI IMAGE)

MENU- SETUP

SYSTEM

HardDisk

Initialisation

choose your hard drive and press OK

Press YELLOW button

Choose one partition or Two as you like

Select YES to confirm

be patient this operation will take some time

DONE 🙂

Now you can record any channel or use TimeShift.